Waters ACQUITY UPLC Operator's, Overview And Maintenance Manual page 35

4. Hand tighten the thumbscrews and confirm they are secure using a
screw driver.
Lamp
Lamp ID
Leak sensor
5. Remove the protective cover from the PEEK cell inlet tubing, and
connect the tubing to the flow cell inlet, confirming that the label on the
tubing matches the type of detector and flow cell in your system.
Outlet tubing
Backpressure Inlet tubing
regulator
Flow cell ID connector
Thumbscrews
Handle
Flow cell
assembly
TP03272
Plumbing the detector 23