Crop; Scale; Invert Color; Mirror X - Tormach CNC Scanner Manual

Image Tools

11.4 Crop

Command line BKCROP
This command allows you to crop an imported image by specifying opposite corners of a rectangular
box. Any part of the image that is not contained in the box will be discarded. Cropping should be done
before any other image operations.

11.5 Scale

Command line BKSCALE
With this command, you can change the scale of the image in either the horizontal (X) or vertical (Y)
dimension by drawing a line and reassigning its dimension.
The scaling factors do not need to be the same for both X and Y directions

11.6 Invert Color

Command line BKINV
This command will invert colors of the image, providing a photonegative effect.

11.7 Mirror X

Command line BKMIR
This command will mirror the image in the X direction. The center of the image remains in the same
place.

11.8 Mirror Y

Command line BKFLP
This command will mirror the image in the Y direction. The center of the image remains in the same
place.

11.9 Image Size

Command line BKSIZE
This command is used to resize the image.
Tormach® CNC Scanner 61 UM10138_0712A