Tormach 770MX Owner's Manual
  1. Manuals
  2. Brands
  3. Tormach Manuals
  4. Industrial Equipment
  5. 770MX
  6. Owner's manual

Tormach 770MX Owner's Manual

Automatic tool changer
Hide thumbs Also See for 770MX:
Table of Contents

Advertisement

Quick Links

Download this manual
TECHNICAL DOCUMENT
Version 1019A
OWNER'S GUIDE
770MX AUTOMATIC TOOL CHANGER (ATC)
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 770MX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tormach 770MX

Summary of Contents for Tormach 770MX

  • Page 1 TECHNICAL DOCUMENT Version 1019A OWNER'S GUIDE 770MX AUTOMATIC TOOL CHANGER (ATC) Page 1...

  • Page 2: Product Information

    Note: If any of these items are missing, we can help. Email support@tormach.com to contact Tormach Technical Support for guidance on how to proceed. Page 2 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)

  • Page 3: Prepare The Machine

    2. Remove four M5 × 0.8 - 10 mm button head cap screws that for this purpose. secure the Power Drawbar button cover. Page 3 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 4 Figure 2-4: Four standoffs installed on the Z-column. 5. Securely tighten the standoffs on the Z-column with a 1-1/2 in. adjustable wrench. Page 4 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 5 The object is heavy, and lifting it by yourself can cause serious injury. 1. Push the tool tray toward the spindle. Page 5 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 6 3. Slowly pivot the linear rails up or down until the rod is perpendicular to the vertical edge of the machinist's square. 4. Tighten the socket head cap screws. Page 6 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 7 If it's not, go to Step 5. loosened them in Step 5). 8. Move the tool tray to its retracted position. Page 7 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 8 Press the Reset button on the operator box. d. Bring the machine out of reset and reference it. Page 8 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 9 2. If you haven't already done so, load a tool into the spindle. 3. Manually rotate the spindle two revolutions by hand. The encoder has now been oriented. Page 9 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 10 If Adjustments are Required Go to Step 18. Figure 2-18: Confirmation dialog box to change the spindle's alignment position. Page 10 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 11 22. Move the Z-axis up: in the MDI Line DRO field, type G20 G53 G1 Z0 F20. Then select the Enter key. 23. Remove the tool from the ATC. Then, select Retract. Page 11 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)

  • Page 12: Operation

    The tray returns to the machining position. 3.1.4 Load a Tool into the Spindle Load a tool into the spindle: Page 12 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
  • Page 13 From the PathPilot interface, on the Settings tab, select the Manual Tool Change radio button. The Automatic Tool Changer (ATC) is prevented from making tool changes. Page 13 ©Tormach® 2019 tormach.com Specifications subject to change without notice. TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)

Table of Contents