Getting Started With Tormach® Cnc Scan Cad; Introduction; System Requirements; Operating System - Tormach CNC Scanner Manual

6 Getting Started with Tormach® CNC Scan CAD

6.1 Introduction

This section guides one through the installation of CNC Scan CAD software and explains the basics that
a user needs to know.
NOTE: This guide assumes that you have used other Windows based programs previously and are
familiar with Windows terminology and techniques.

6.2 System requirements

The following operating systems and hardware are recommended to install and run CNC Scan CAD.
6.2.1

Operating system


Microsoft Embedded Standard : Tormach® Mach OS

Microsoft Windows XP

Microsoft Windows Vista
6.2.2

Processor


Pentium III 800 MHz or higher
6.2.3

RAM


512 MB (recommended)
6.2.4

Video


1024 x 768 VGA with True Color (minimum)
6.2.5

Hard disk


3GB minimum for CNC Scan CAD

20GB or greater recommended for CNC Scanner
6.2.6

Pointing device


Mouse, trackball or other devices
UM10138_0712A
Getting Started with Tormach® CNC Scan CAD
28 Tormach® CNC Scanner