About This Documentation; Overview On Target Groups And Product Phases; Purpose - Bosch Rexroth IndraMotion MLC Operating Instructions Manual

IndraControl VPB 40.4

1 About this documentation

Editions of this documentation
Edition Release Note
Date
01 2017-11 First edition
02 2018-10 Two slot device supplemented
Tab. 1-1: Change Record

1.1 Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the
"mechanic/electrician"
documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group

1.2 Purpose

This document instructs the technical staff of the machine manufacturer on how
to perform the mechanical and electrical installation safely and on how to
commission the device.
DOK-MLC***-INDRACTRLV4-IT02-EN-P
can execute the
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
Bosch Rexroth AG
About this documentation
activity "install"
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create
the NC program
using this
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
1/87