Serial port
The RS-232 serial port provides support for
remote monitoring and management through a
command line interface or menu system.
LED indicators
The LED indicators can be viewed from both the
front and the back of the FibreBridge 2300R/D.
indicates if power is available from the
Power:
supply.
Exhibit 1.5-1 Physical characteristics
1.72 inches
(43.69 cm)
Front
Air vents
SCSI Port 2
Connector side
Ready
Power
LEDs
SCSI Port 1
LEDs
SCSI Port 1
Fibre Channel Activity Power
SCSI Port 2
2 GB operation
Fibre Channel port
LED blinks to show activity on the
FC Activity:
Fibre Channel port (numbered 0). During very
high activity, the LEDs appear to be steadily lit.
2 Gigabit operation:
FibreBridge is using 2 Gigabit.
SCSI 0 Activity, SCSI 1 Activity:
has its own LED to show activity on that bus
(numbered 0 and 1).
should light after power has been applied
Ready:
indicating the FibreBridge is ready to operate.
Fibre Channel Activity
2 GB operation
SCSI Port 1
SCSI Port 2
Ready
Ethernet port
Air vent
RS-232 port
a lit LED indicates the
each SCSI bus
Connector side
(see below for details)
Power receptacle
Installation: FibreBridge 2300R/D
16