ATTO Technology ATTO FibreBridge 2350C Specification Sheet

attotech.com
ATTO FibreBridge
High-Performance Fibre Channel-to-SCSI Bridging
Architecture for tomorrow's faster drives
The ATTO FibreBridge™ 2350C is an
embeddable Fibre Channel-to-SCSI
bridge featuring one (1) Fibre Channel
port with a 2-Gigabit SFP connector and
two (2) independent Ultra3 SCSI busses
and a standardized 4U cPCI form factor.
The ATTO FibreBridge 2350C is the ideal
bridging component to allow mid-range
native SCSI storage devices to be
incorporated into Fibre Channel networks.
It offers a winning combination of
performance, versatility and affordability
for current and next-generation
SCSI-based storage solutions.
The standardized physical design enables
manufacturers to centralize on a common
component design across multiple
product lines while maintaining
distinct interface technologies.
ATTO's built-in intelligent Bridging
Architecture™ offers a unique combination
of features that gives manufacturers
the ability to embed customized value
into their products.
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
™
2350C
TECHNICAL
HIGHLIGHTS
• 1 x 2 with one (1) 2.125-Gigabit
Fibre Channel port and two (2)
independent Ultra3 SCSI busses
• 400 MB/sec. maximum throughput
• Support for SNIA Extended Copy
• ExpressNAV™ integrated management
console for component monitoring and
management
• RS-232, Ethernet and Fibre Channel
in-band configuration, monitoring and
management
• Full support for direct connect to
F-port fabric switches
• Standardized 4U cPCI form factor