2.5.8 Ethernet configuration commands ..................................59
2.5.9 Mapping commands .........................................................61
3.0 Configuring the FibreBridge ..........................................................64
3.0.1 Handling multiple initiators ..............................................65
3.1 Mapping ......................................................................................67
3.1.1 Route addressing ..............................................................69
AutoLogSense
DhcpFixedDelay
EthernetSpeed
Exit
IPAddress
IPDHCP
IPGateway
IPSubnetMask
Password
Ping
ReadOnlyPassword (FB 2400 only)
ReadOnlyUsername (FB 2400 only)
SNMPDumpMIB
SNMPTrapAddress
SNMPTraps
SNMPExtendedTraps
Username
AddressMap
AutoMap
DispFCPortDB
FCConnMode
FCHard
FCHardAddress
FCPortFailover (FB 2400 only)
FCPortRecover (FB 2400 only)
FCTargets
FibreBridgeTargetLUN
LogicalUnitAddressing (FB 2400 only)
Route
RouteChange
RouteDisplay
RouteDisplay (FB 2400 only)
RouteOffline
RouteOnline
SCSIInitID
SCSIInitID (FB 2400 only)
SCSITargets
ServicesLUN
Single initiator
Multiple Fibre Channel initiators
Multiple FC & SCSI initiators
Use ExpressNAV (except FB1180)
Use BridgeTools (FB 1180)
Fibre Channel World Wide Name (WWN)
Arbitrated Loop Port Address (AL_PA)
Addressing devices
Manual SCSI device route mapping