ATTO Technology FibreBridge 1180D Installation And Operation Manual page 91

CAUTION CAUTION
Do not interrupt the flash process. Do not
power down the host or the FibreBridge
until the display returns the Ready prompt.
Interrupting the flash process will make
your FibreBridge inoperable and you will
have to return it to ATTO Technology for
repair.
10 Once the download is complete, cycle power on
the FibreBridge to invoke the new firmware.
Update firmware on the FibreBridge 2400
CAUTION CAUTION
Before beginning this procedure, ensure
that all I/O to the FibreBridge has stopped.
1 Connect to ExpressNAV (refer to
the Ethernet ports
on page 13) and click on the
Firmware page.
2 Click Browse and locate the firmware you
unzipped in the preliminary steps.
3 Click Upload and wait until a success message
is displayed.
CAUTION CAUTION
Do not interrupt the flash process. Do not
power down the host or the FibreBridge
until the display returns the Ready prompt.
Interrupting the flash process will make
your FibreBridge inoperable and you will
have to return it to ATTO Technology for
repair.
4 Click the Restart link.
5 Click on Restart.
Configuring
80
Update firmware