Interface Options; Using Expressnav; Opening An Expressnav Session; Optimizing Expressnav In Internet Explorer - ATTO Technology FibreBridge 2370E Installation And Operation Manual

Alternative methods to the ATTO ExpressNAV interface may be used to manage the Fibre Bridge. ATTO
ExpressNAV is the recommended interface.

Using ExpressNAV

Each page in the ATTO ExpressNAV interface
provides information and/or configuration parameters
based on a specific topic.
ATTO ExpressNAV is the recommended
management tool for the Fibre Bridge. It is a web-
based graphical user interface (GUI) that allows you to
manage the Fibre Bridge by clicking choices and
commands in traditional GUI fashion or by entering
CLI commands directly, as you would in a terminal
emulation session, on the Advanced CLI page.

Opening an ExpressNAV session

1 Point your browser at the IP address of the
Fibre Bridge. Refer to
on page 13.
2 The ExpressNAV home page is displayed.
Click Enter .
3 Enter the user name and password values.
Note
The default values are user name: root and
password: Password. The user name is case
insensitive and password is case sensitive. It
is best practice to change user names and

Using the serial port

1 Connect a cable from Fibre Bridge RS-232
serial port to the serial (COM) port on a
personal computer.
2 Turn on the Fibre Bridge.
3 Start a terminal emulation program on the
personal computer, and use it to connect to the
Fibre Bridge. For example, if you are using
HyperTerminal on a computer running a
Windows operating system,
a. Type Fibre Bridge in the New
Connection dialog box.
25
ATTO Technology Inc. FibreBridge Installation and Operation Manual

5.0 Interface options

Discover the IP address
passwords. Refer to
page 15.
The Status page appears.
Each page can be reached through the menu at the side
of each page. An image on each page's header shows
each port in the product faceplate. Each port is
clickable and takes you to the appropriate page.
If you have completed configuration operations and
have clicked Submit on the page you are viewing, go
to the Restart page and restart the Fibre Bridge to
save the settings.
If you have not completed configuration changes, go
on to the next page.
Optimizing ExpressNAV in Internet
Explorer
1 Go to the browser toolbar and select Tools
2 Select Internet Options
3 Select the Security tab
4 Select the Custom Level button.
5 On the menu presented, go to the Microsoft
VM, Java permissions and make sure
Disable Java is not selected.
6 Go to the Miscellaneous topic and select
METAREFRESH .
b. Click OK .
c. In the Connect To dialog box, for the
Connect using field select the COM
port number to which your serial cable
is connected.
d. Click OK .
e. In the COM Properties dialog box
select the following values:
• Bits per second: 115200
• Data Bits: 8
• Parity: None
• Stop Bits: 1
Modify passwords
on