Table of Contents
Advertisement
Appendix A
AutoMap, RouteXxxx and AddressMap commands map devices so that they may be recognized by the
FibreBridge. These commands are not available as described for the FibreBridge 2400. Refer to
Unit addressing for FB2400 only
AutoMap
AutoMap
Distributes maps across all Fibre Channel ports.
AutoMap [fp] Distributes maps across the named Fibre Channel port(s)
The AutoMap command is unavailable in AddressMap C mode.
RouteDisplay
You may request information about currently mapped routes using the
RouteDisplay
RouteDisplay [fp]
RouteDisplay [status]
RouteDisplay [[fp] [fl]]
RouteDisplay [[fp]
[status]]
Valid status values
RouteXxxxx commands
Following are samples of the RouteXxxxx command interaction showing actual commands and their
output to the Services port.
Ready.
SCSIPortList
3
;SCSI Port
Port Status
0
O.K.
1
Disabled
Ready.
FcPortList
2
;Fibre Port
Port Status
0
O.K.
i
ATTO Technology Inc. FibreBridge Installation and Operation Manual
Mapping command examples
on page 73.
Displays all current maps
Displays all maps for the specified FC port
Displays all maps with a given route status
Displays the current map of fp & fl.
Displays all maps for a given Fibre Channel port with a named route
status
Online
Offline
Unavailable
Available
Mapped
Unmapped
FibreBridge
All
RouteDisplay
Ready.
set RouteOffline 0 3
Ready.
get RouteOffline 0 3
;fp fl sb st sl On/Offline
0
3
0
0
0 Offline
Ready.
RouteChange 0 3 1 0 0
Logical
CLI command.
Advertisement
Table of Contents
