Table of Contents
Advertisement
Serial port connections
The ATTO FibreBridge supports remote service
operations over the RS-232 serial port using
standard terminal emulation software available
with most systems.
Connect a DB-9 crossover serial cable (null
modem) between the ATTO FibreBridge serial
port and one of the computer's serial COM ports.
A gender changer or DB-9 to DB-25 converter
may be needed depending on the cables being
used.
Ethernet connections
This section does not apply to the ATTO
FibreBridge 1180.
The 10/100 BaseT Ethernet port provides remote
monitoring and management using the ATTO
ExpressNAV interface.
When you connect an Ethernet cable between the
FibreBridge and a 10/100Base-T connection, you
may need a crossover cable connecting directly to
a computer. The ATTO FibreBridge will auto
detect the Ethernet speed by default.
Installation: Fibre Channel ports
4
Advertisement
Table of Contents
