Table of Contents
Advertisement
XCError
Retrieves any SCSI sense data returned by an Extended
Copy command because of an error. CmdNumber is the
data returned by the XCstatus command (see below).
SCSI Status, SenseKey, ASC and ASCQ fields display the
sense data returned by the Extended Copy command. If a
device also returns sense data, the device's serial number
will be displayed in the DeviceId field; its data will be
displayed in the DStat, DSK, DASC and DASCQ fields.
Any field that does not contain valid data will be filled in
with 00.
Information only: get XCError [CmdNumber]
XCStatus
Polls the status of Extended Copy commands issued to the
FibreBridge. CmdNumber is unique identifier for a
particular command. ListId displays List ID specified in
the CDB of the extended copy command. HostId field
displays 8-byte Node Name of FC host that issued
Extended Copy command. Status indicates current state
of Extended Copy command. Initializing Active, Done or
Error. Transferred displays the amount of data
transferred in megabytes.
Information only: get XCStatus
Interfaces: diagnostic commands
50
Advertisement
Table of Contents
