Interface Options; Using Expressnav; Opening An Expressnav Session; Optimizing Expressnav In Internet Explorer - ATTO Technology FibreBridge 2370E Installation And Operation Manual

Alternative methods to the ATTO ExpressNAV interface may be used to manage the FibreBridge. ATTO
ExpressNAV is the recommended interface.

Using ExpressNAV

Each page in the ATTO ExpressNAV interface
provides information and/or configuration parameters
based on a specific topic.
ATTO ExpressNAV is the recommended
management tool for the FibreBridge. It is a web-
based graphical user interface (GUI) that allows you to
manage the FibreBridge by clicking choices and
commands in traditional GUI fashion or by entering
CLI commands directly, as you would in a terminal
emulation session, on the Advanced CLI page.

Opening an ExpressNAV session

1 Point your browser at the IP address of the
FibreBridge. Refer to
page 13.
2 The ExpressNAV home page is displayed.
Click Enter .
3 Enter the user name and password values.
Note
The default values are user name: root and
password: Password. The user name is case
insensitive and password is case sensitive. It
is best practice to change user names and
passwords. Refer to
page 23.
The Status page appears.

Using the serial port

1 Connect a cable from FibreBridge RS-232
serial port to the serial (COM) port on a
personal computer.
2 Turn on the FibreBridge.
3 Start a terminal emulation program on the
personal computer, and use it to connect to the
FibreBridge. For example, if you are using
HyperTerminal on a computer running a
Windows operating system,
a. Type FibreBridge in the New
Connection dialogue box.
27
ATTO Technology Inc. FibreBridge Installation and Operation Manual

6.0 Interface options

Discover the IP address
Modify passwords on
Each page can be reached through the menu at the
side of each page. An image on each page's header
shows each port in the product faceplate. Each port is
clickable and takes you to the appropriate page.
If you have completed configuration operations and
have clicked Submit on the page you are viewing, go
to the Restart page and restart the FibreBridge to
save the settings.
If you have not completed configuration changes, go
on to the next page.
Optimizing ExpressNAV in Internet
Explorer
on
1 Go to the browser toolbar and select Tools.
2 Select Internet Options.
3 Select the Security tab.
4 Select the Custom Level button.
5 On the menu presented, go to the Microsoft
VM, Java permissions and make sure
Disable Java is not selected.
6 Go to the Miscellaneous topic and select
METAREFRESH .
b. Click OK .
c. In the Connect To dialogue box, for
the Connect using field select the
COM port number to which your serial
cable is connected.
d. Click OK .
e. In the COM Properties dialogue box
select the following values:
• Bits per second: 115200
• Data Bits: 8
• Parity: None
• Stop Bits: 1