btsr SMART MATRIX WARP Operating Manual page 90

Hide thumbs Also See for SMART MATRIX WARP:

Table of Contents

This parameter indicates the Max Peak Value (expressed as positive percentage value) with respect to the

reference tension WORK TENSION, above which a failure condition will be signaled. The following two

values must be specified:

PH % = Positive error percentage (max peak) with respect to the tension WORK TENSION

PH (ms) = Minimum duration of error condition to signal the failure

This parameter indicates the Min Peak Value (expressed as negative percentage value) with respect to the

reference tension WORK TENSION, below which a failure condition will be signalled. The following two

values must be specified:

PL % = Negative error percentage (min peak) with respect to the tension WORK TENSION

PL (ms) = Minimum duration of error condition to signal the failure

This parameter indicates the Tension Value (expressed as negative percentage) with respect to the

reference tension WORK TENSION, below which the yarn missing condition will be signaled. The following

two values must be specified:

NY % = Negative error percentage with respect to the tension WORK TENSION

NY (ms) = Minimum duration of error condition to signal the failure.

Example of Tension Control:

SMART MATRIX

TS5/TS7 Sensor Features

- 3-10 -

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the SMART MATRIX WARP and is the answer not in the manual?