btsr SMART MATRIX WARP Operating Manual page 6

How to Use this Manual
The manual is subdivided into 3 sections:
Section 1 – includes the connection diagrams and the electrical interface of the various system
components.
Section 2 – provides the operating instructions for a correct use of the SMART MATRIX WARP terminal
as well as the parameter configuration/programming instructions and data/errors display
facilities.
Section 3 – describes the main characteristics and performances of the various system components (IS3
sensors, TS5/TS7 sensors, SM-DIN WARP modules, etc.). Furthermore, it provides some
details to better understand the operating principles upon which the SMART MATRIX WARP
system is based (Row/Column/Bar Priority, SLOW-FAST Control Parameters, etc.).
Symbols Used
This symbol is used to point-out notes, warnings and other important information.
IS3 Within this manual, the IS3F-485 sensors used for SMART MATRIX WARP application will be
indicated with the generic wording IS3.
TS5/TS7 Within this manual, the TS5/Dttt... or TS7/Dttt... sensors as well as the last generation TS55/Dttt...
/ TS77/Dttt... sensors used for SMART MATRIX WARP application will be indicated with the
generic wording TS5/TS7.
SETUP → DEVICE
The graphic symbol of either IS3
that the relevant function applies exclusively to the indicated sensor type.
In the program function descriptions, this symbol indicates the function
(e.g. DEVICE) within the menu item (SETUP).
sensor or TS5/TS7
SMART MATRIX
sensor, shown on the page header, indicates
Introduction
- ii -