Act/D Upgrade - btsr SMART MATRIX WARP Operating Manual

ACT/D Upgrade

This function allows you to upgrade the firmware of ACT/D modules.
The upgrading requires two separate steps for lamps associated with columns/rows/bars and for
lamps associated with creels.
SETUP →
Enter the SETUP menu.
Select SERVICE.
Select ACTD UPG.
Select COL LAMP (or
(If no lamps have been configured for columns/rows/bars,
the following error message will appear:
LAMPS NOT ACTIVE)
Select the coordinates of ACT/D module to be upgraded, or
all modules (ALL DEVICES).
SMART MATRIX
ACT/D Upgrade
SERVICE → ACT/D UPG
ROW LAMP/BAR LAMP)
COL (ROW/BAR)
- 2-35 -