Two-Wire Control, Clockwise/Counterclockwise Rotation 2 - Siemens SINAMICS G110M Operating Instructions Manual

Advanced commissioning
8.5 Controlling clockwise and counter-clockwise rotation via digital inputs
8.5.3

Two-wire control, clockwise/counterclockwise rotation 2

Function description
Figure 8-7
Commands "ON/OFF1 clockwise rotation" and "ON/OFF1 counter-clockwise rotation" switch on
the motor - and simultaneously select a direction of rotation. The converter accepts a new
command at any time, independent of the motor speed.
Table 8-14
ON/OFF1 clockwise rota‐
Examples
Table 8-15
Parameter
p3334 = 2
p3330[C] = 722.0
p3331[C] = 722.1
176
Two-wire control, clockwise/counterclockwise rotation 2
Function table
ON/OFF1 counter-clock‐
tion wise rotation
0
1
0
1
Two-wire control and setting the assignment of the digital inputs
Description
2/3 wire control selection
2: Two-wire control, clockwise/counterclockwise rotation 2
BI: 2/3 wire control command 1 (ON/OFF1 clockwise rotation)
Command is received via digital input 0 (DI 0)
BI: 2/3 wire control command 2 (ON/OFF1 counter-clockwise rotation)
Command is received via digital input 1 (DI 1)
Function
0 The motor stops.
0 Clockwise motor rotation.
1 Counter-clockwise motor rotation.
1 The motor stops.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL