Siemens SINAMICS G110M Operating Instructions Manual page 148

Protecting the converter settings
7.1 Write protection
Number
p8806[0...53]
p8807[0...15]
p8808[0...53]
p8809[0...53]
p9400
p9484
Note
Write protection for multimaster fieldbus systems
Via multimaster fieldbus systems, e.g. BACnet or Modbus RTU, in spite of write protection being
activated, parameters can still be changed. So that write protection is also active when accessing
via these fieldbuses, you must additionally set p7762 to 1.
146
Name
Identification and Maintenance 1 / I&M 1
Identification and Maintenance 2 / I&M 2
Identification and Maintenance 3 / I&M 3
Identification and Maintenance 4 / I&M 4
Safely remove memory card / Mem_card rem
BICO interconnections search signal source / BICO S_src srch
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
Distributed converter for SIMOGEAR geared motors