Invert Setpoint - Siemens SINAMICS G110M Operating Instructions Manual

Advanced commissioning
8.17 Setpoint calculation
8.17.2

Invert setpoint

Function description
The function inverts the sign of the setpoint using a binary signal.
Example
To invert the setpoint via an external signal, interconnect parameter p1113 with a binary signal
of your choice.
Table 8-54
Parameter
p1113 = 722.1
p1113 = 2090.11
Parameter
Number
p1113[C]
270
Application examples showing how a setpoint is inverted
Description
Digital input 1 = 0: Setpoint remains unchanged.
Digital input 1 = 1: Converter inverts the setpoint.
Inverts the setpoint via the fieldbus (control word 1, bit 11).
Name
BI: Setpoint inversion
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
Factory setting
Dependent on the
converter