Diagnostics; Error Messages - Jetter JetMove D203 User Manual

JetMove D203
9
9.1
Fault Message Table for the JetMove D203
Error Number Type of Error
F 00 Hardware Errors
F 01 Internal voltage
supply error
F 03 Motor cable
breakage
F 04 Overvoltage in
the DC link
Jetter AG

Diagnostics

Error Messages

INFO
In the case of a error message, the letter "F" and two successive numbers
appear on the 7-segment display every second.
Description
Internal hardware
defect
One or more
power supply
voltages are
beyond their limits
The motor cable is
broken
Please be careful:
The motor cable is
tested when the
drive controller is
enabled for the
first time
A DC link voltage
of> 480 V has
been detected
Response to Troubleshooting
Errors
– Immediate – Cut drive controller
pulse disable from power lines
– Return the amplifier
for repair
– Immediate – Cut drive controller
pulse disable from power lines
– Return the amplifier
for repair
– Immediate – Check the motor
locking of cable connections
controller – Acknowledge failure
– Immediate – Check input voltage
locking of supply
controller – If the motor is used
as generator, reduce
the regenerating
power
– Acknowledge failure
9.1 Error Messages
81