JetMove D203
The JetMove D203 is interlinked with the controller, other JetMove amplifiers, or JX2
peripheral modules by means of the JX2 system bus. The JX2 system bus input
BUS-IN is a 9-pin male Sub-D connector, and the JX2 bus output BUS-OUT is a 9-pin
female Sub-D connector.
When the JC24x option is used, the JX2 system bus must not be used at the
BUS-IN connection (X18).
7.8.1
Specification of connectors
On the BUS-OUT (X19) side
•
•
On the BUS-IN (X18) side
•
•
JX2 System Bus Cable Specification
The minimum requirements listed below apply to the JX2 system bus cable:
Jetter AG
Specification of the JX2 system bus cable
9-pin male SUB-D connector
Metallized enclosure
9-pin female SUB-D connector
Metallized enclosure
JX2 System Bus Cable - Technical Data
Parameter
Core cross-sectional area
Cable capacitance
Resistivity
Number of cores
Shield
Twisting
Material
Temperature class
Specification
1 MBaud:
0.25 - 0.34 mm
500 kBaud:
0.34 - 0.50 mm
250 kBaud:
0.34 - 0.60 mm
125 kBaud:
0.50 - 0.60 mm
60 pF/m max.
1 MBaud:
70 max.
500 kBaud:
60 max.
250 kBaud:
60 max.
125 kBaud:
60 max.
5
Complete shielding, no paired shielding
Core pair CL and CH twisted.
Copper
60 °C
7.8 JX2 System Bus
2
2
2
2
Ω
/km
Ω
/km
Ω
/km
Ω
/km
75