Serial Programming Cable - Jetter JetMove D203 User Manual

12 Option -JC24X

12.10.2 Serial programming cable

Specification of Connectors
On the side of the integrated controller
•
•
On the PC side
•
•
Connecting Cable Specifications
•
•
•
•
Cable Shielding
•
•
120
8-pin MiniDIN connector (male)
Type: KMDLA - 8P
Manufacturer: KYCON
Allowed conductor size: 0.128 ... 0.051 mm
9-pin female SUB-D connector in metallized housing (quality grade 3).
Allowed conductor size: 0.25 ... 0.128 mm
Number of cores: 3
Core cross-sectional area: 0.14 mm
Cable length: 5 m (cable confection # 196 5m)
Max. cable length: 15 m
Complete shielding, no paired shielding
The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area (shield twisted, clamped under the
strain relief clamps, and wrapped with copper foil).
Controller
SER1, SER2
Shield
Pin
8
4
2
On the PC side (COM1, COM2), pins 7 and 8, as well as pins 1, 4 and 6 must be
short-circuited.
2
2
2
Programming Cable
Shield
Clamp
Shield
Connect shield with the greatest
possible surface area!
Use metallized housing only!
Signal
TxD
RxD
GND
PC
COM 1, COM 2
Pin
RxD 2
TxD 3
5
Jetter AG