Checking The Installation; Notes On Safety As Regards The Installation - Jetter JetMove D203 User Manual

JetMove D203
2.4
2.5
WARNING
Jetter AG

Checking the Installation

Check motor and servo amplifier wiring and connections by means of
the connection diagrams used.
Check the holding brake, if existing, for proper functioning.
Check to see whether all necessary protection measures against
accidental contact with live or moving parts have been taken.
Carry out any other checks specific to or required for your system.
Notes on Safety as regards the
Installation
Hazard caused by high operating voltage!
Extremely hazardous voltages of up to DC 500 V may
occur!
Please, observe the following precautions in order to avoid injuries such as
muscle cramps, burns, unconsciousness, respiratory standstill or possibly death:
Have installation and maintenance jobs carried out by qualified personnel
only, see chapter 1.1.3 "Qualification of Staff", page 12.
Switch off the operating voltage.
Please take into account the information on residual dangers given in
chapter 1.3.2 "Hazards after POWER is turned OFF", page 19.
Before carrying out installation and maintenance jobs, separate the servo
amplifier JetMove D203 and all connected devices from the mains.
2.4 Checking the Installation
27