Hmi Cable Kay_0533-0025 - Jetter JetMove D203 User Manual

12 Option -JC24X

12.10.5 HMI cable KAY_0533-0025

The HMIs LCD 52, LCD 54, and LCD 54Z are equipped with a non-detachable cable
connecting the LCD with the integrated controller. On the integrated controller side,
this cable has a 15-pin male SUB-D connector. For connection of the HMI to the
8-pin MiniDIN female connector of the -JC 24x (interface SER2), a cable adapter will
be needed.
Specification of Connector/Socket
On the side of the integrated controller
•
•
On the HMI side
•
•
Connecting Cable Specifications
•
•
•
Cable Shielding
•
•
124
8-pin MiniDIN connector (male)
Type: KMDLA - 8P
Manufacturer: KYCON
Allowed conductor size: 0.128 ... 0.051 mm
15-pin female SUB-D connector in metallized housing (quality grade 3).
Allowed conductor size: 0.25 ... 0.128 mm
Number of cores: 6
Core cross-sectional area: 0.14 mm
Cable length: 25 cm
Complete shielding, no paired shielding
The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area (shield twisted, clamped under the
strain relief clamps, and wrapped with copper foil).
2
2
2
Jetter AG