Ip Address Based On The Address Switch Position - Jetter JetMove D203 User Manual

12 Option -JC24X
NOTICE!
12.8.3 IP address based on the address switch
In all other address switch positions, the IP address is taken out of the configuration
memory; the least significant byte is substituted by the position of the address
switches.
The IP address of a -JC24X is made up according to the following pattern:
Fig. 33: IP address pattern
•
•
•
114
Do not change the version number contained in register 10131.
position
192 . 168 . 1 .
The first three bytes (e.g. 192.168.1) are taken out of the configuration memory.
The higher-order nibble of the fourth byte is set by means of the address switch
"High" (value range: 0 through 15).
The low-order nibble of the fourth byte is set by means of the address switch
"Low" (value range: 0 through 15).
Address
High Low
=C
1 1 0 0 0 1
High Low
=5
0 1
Jetter AG