7 Description of Connections
7.3
7.3.1
Specification of the connector for terminal X71 / X81 (ENCODER)
•
•
Specification of the resolver cable
•
•
•
•
•
•
7.3.2
56
Resolver Connection
Specifications
15-pin male SUB-D connector
Metallized enclosure
Cable size: 4 * 2 * 0.14 mm² (AWG 26(8)) min.
Cores have to be shielded and twisted in pairs and must be included in an overall
shielding
The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
Material: Copper
Temperature class: 60 °C
Maximum cable length: 50 m
Resolver cable with mating connector
INFO
The compatible resolver or HIPERFACE mating connector can be ordered from
Jetter AG by specifying the part number below:
Article # 15100069
The complete resolver cable connecting the servo amplifier series JetMove D203
and synchronous servo motors can be ordered from Jetter AG by specifying the
following item number (KAY) and the respective cable length in cm:
KAY_0823-xxxx
Resolver / HIPERFACE
For the JetMove D203 servo amplifier series
Jetter AG