Power Supply; Requirements - Jetter JetMove D203 User Manual

12 Option -JC24X
12.2

12.2.1 Requirements

CAUTION
94

Power Supply

Power Supply Unit - Requirements
Voltage range
Maximum current consumption at
terminal X30:
DC 24 V 6 A:
– Digital Outputs
CAUTION
• The maximum supply voltage must not exceed DC 30 V since a higher supply
voltage may cause damages to the JC24X.
• If the JC24X is not supplied with sufficient power (under-voltage), malfunctions
of the digital outputs may occur.
INFO
Protection against polarity reversal:
The -JC24X is protected against reverse polarity. As a test, a voltage of 24 volt
with reversed polarity was applied to the test object for 10 s.
DC 24 V (20 ... 28.8 V)
Residual ripple: <5 % filtered
SELV
6 A
Jetter AG