Warnings - Jetter JetMove D203 User Manual

9 Diagnostics
Fault Message Table for the JetMove D203
Error Number Type of Error
F 42 Malfunction of
encoder 2 (only
for the option
CNT)
F 43 Communication
error
F 44 Communication
error
F 45 Communication
error
F 46 External error in
encoder
9.2
If the dot in the seven-segment display is flashing, one or several warnings have
been recognized. Please check in the motion setup or by making enquiries in the
PLC program which warning is active by means of the motion commands.
86
Description
Broken encoder
line or initialization
error of the
encoder
Termination after
a max. number of
lost cyclic data
transmissions
CAN controller is
in Error Passive
state.
The error counter
value exceeds
127.
CAN controller is
in Bus OFF state.
The error counter
value has reached
255.
A smart encoder
(EnDat 2.2) may
have sent an error
message

Warnings

Response to Troubleshooting
Errors
– Immediate – Check the encoder
motor power line and all plug-in
disable connections
– Acknowledge the
error
– Stop with – Check the
emergency communication
stop ramp connection
– Stop with – Check the
emergency communication
stop ramp connection
– Stop with – Check the
emergency communication
stop ramp connection
– Immediate – Check the
motor power parameters
disable – Check the encoder
Jetter AG