JetMove D203
2
2.1
•
•
•
•
Accessories
Accessories are not part of the scope of delivery!
•
•
•
•
•
•
•
•
•
Jetter AG
Installation of the JetMove D203
Scope of Delivery
Digital servo amplifier JetMove D203
Mating connector plugged-on
Cable straps serving as strain relief and motor cable shield
User Manual
System bus cable of cable confection # 530 x.x m; length: 0.2 m through 5.0 m.
See chapter 7.8 "JX2 System Bus", page 74
Motor power cable; please refer to chapter 7.2 "Motor Connection", page 50
Resolver cable, see chapter 7.3 "Resolver Connection", page 56
HIPERFACE cable, see chapter 7.4 "HIPERFACE Connection", page 59
Motors, e.g. synchronous servo motors of the motor series JH, JK or JL, made by
Jetter AG
Motor circuit-breaker, see chapter 5 "Technical Data", page 37
Circuit-breaker, see chapter 5 "Technical Data", page 37
Isolating, respectively autotransformer
Mounting screws, 2 pcs.; refer to fig. 4, page 25
INFO
If you are not sure which mounting accessories you will need, please contact
Jetter AG.
2.1 Scope of Delivery
23