JetMove D203-JC24X
12.7
12.7.1 LEDs
Fig. 31: Status LEDs
Jetter AG
Status LEDs, Mode Selector
Vout (green)
ERR2 (red)
VCC2 (green)
ERR1 (red)
RUN (green)
SD (yellow)
12.7 Status LEDs, Mode Selector
Status LEDs
Supply voltage for the digital output
driver is OK
Error in the output driver
Overload, short circuit,
overtemperature of one or more
outputs
Supply voltage for the logic circuit is OK
Error; error description in register 2008
Operating system of the integrated
controller is active
Read or write access is being made to
the SD card
109