JetMove D203-JC24X
12.6
12.6.1 Connecting to the RJ45 jack
The integrated controller -JC24X is connected to the Ethernet through its RJ45 jack.
There are two types of interconnecting cables used for 10/100 MBit/s twisted pair
Ethernet.
•
•
Fig. 27: Ethernet connection
Jetter AG
Ethernet Interface
Straight-through twisted pair cables
Crossover cables (transmitting and receiving lines are crossed)
LED
LNK
LED
ACT
The LEDs of the RJ45 Ethernet Jack
Designation
LNK
ACT
INFO
LED "LNK" is lit green:
The correct cable has been used between the Ethernet network and the -JC24X.
LED "ACT" is lit yellow:
The integrated controller -JC24X carries out data exchange via Ethernet.
12.6 Ethernet Interface
Description
Linkage: The integrated controller
integrated controller-JC24X is linked
with an Ethernet
Activity: The integrated controller
-JC24X transmits, respectively
receives, data via Ethernet
105