On Delay - Jetter JetMove D203 User Manual

12 Option -JC24X
12.9
The switch-on delay function ensures that the -JC24X waits a defined time period
before it initializes the system bus, and launches the application program. This delay
time is set in steps of 100 ms in register 2032.
Example 3: On delay via register 2032
A value of 60 in register 2032 means that the -JC24X will wait 6 seconds before
initializing the system bus.
118

ON Delay

Register 2032: ON Delay
Functioning
Principle
Read
Write
Value range
Value following a reset
INFO
• If modules connected to the system bus require a certain time until they get
initialized, the ON delay via register 2032 provides the necessary delay time.
• If JX-SIO modules are connected to the system bus, we recommend to set
register 2032 to the value of 60.
• A flashing RUN LED indicates that the delay time caused by switch-on delay is
running. With advancing delay time the flashing intervals of the RUN-LED
become shorter and shorter.
Description
Actual ON delay, resolution 100 ms
New ON delay value
10 ... 600
Latest set value
Jetter AG