JetMove D203
7
•
•
7.1
Specification of terminal X1
•
•
•
•
Connecting cable specifications
•
•
•
•
•
Cable shielding
•
Fig. 8: Connection of the mains power supply
Jetter AG
Description of Connections
For axis A, the connection designations X71 through X74 are available.
For axis B, the connection designations X81 through X84 are available.
Mains Power Supply
3-pin screw clamping terminal (type PC 4/ 3-ST-7.62)
Cross-sectional area of the connecting cable: 0.25 - 4.0 mm
Bladed screw-driver: 0.6 x 3.5 x 100 mm
Stud torque for the screw clamping terminal:
0.5 Nm - 0.6 Nm (4.4 - 5.3 lbf-inch)
Cable size: 3 * 1.5 mm² (AWG 16(3))
Material: Copper
Temperature class: 60 °C
Stripping length of cores: 6 mm
Bootlace ferrules are recommended
Not needed
Terminals X1
L
N
PE
yellow / green
blue
black
X1
Power Supply
1-Phase Connection
Signal
L
N
PE conductor
Fuse or
Overcurrent Circuit Breaker or
Motor Current Circuit Breaker
7.1 Mains Power Supply
2
(AWG 24 - AWG 12)
Specifications
•
AC 230 V between
mains phase and
neutral
PE
Neutral
Mains Phase
49