Connection Assignment Of Terminal Box; Connection Of The Resolver; Specification - Jetter JetWeb JetMove 203-230 User Manual

7 Description of Connections
7.2.4
*)
7.3
7.3.1
Specification of the connector for terminal X61 (ENCODER)
•
•
Specification of the resolver cable
•
•
•
•
•
•
52

Connection assignment of terminal box

Connection Assignment of Terminal Box
Amplifier terminals
X62.U2
X62.V2
X62.W2
X62.PE
X10.BRAKE2
X10.GND
alternatively to motor connectors

Connection of the Resolver

Specification

9-pin male SUB-D connector
Metallised enclosure
Cable size: 3 * 2 * 0.14 mm² + 2 * 0.5 mm²
2 * 0.5 mm² must be used for the thermal sensor
Cores have to be shielded and twisted in pairs and must be included in an overall
shielding
The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
Material: Copper
Temperature class: 60 °C
Maximum cable length: 50 m
Motor Terminal Box - Terminal Assignment
Pin 1
Pin 2
Pin 3
Pin 4
Pin 7
Pin 8
JetWeb
*)
Phase 1
Phase 2
Phase 3
Protective earth
Brake +
Brake -
Jetter AG