Resolver Connection; Specification; Resolver Cable With Mating Connector - Jetter JM-206-230 User Manual

7 Description of Connections
7.3
7.3.1
Specification of Mating Connector X61 (ENCODER)
•
•
Specification of the Resolver Cable
•
•
•
•
•
•
7.3.2
Mating connector of the resolver (solder side)
Solder
Side
Fig.: 12: RC series mating connector of the resolver (internal thread M23)
58

Resolver Connection

Specification

9-pin male SUB-D connector
Metallized housing
Cable size: 4 * 2 * 0.14 mm² (AWG 26(8))
Cores have to be shielded and twisted in pairs and have to be included in an
overall shielding
The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
Material: Copper
Temperature class: 60 °C
Maximum cable length: 50 m

Resolver Cable with Mating Connector

Note!
The resolver respectively HIPERFACE mating connector of the Jetter motor
series JL, JK and JH can be ordered from Jetter AG by supplying the following
particulars:
Item # 15100069
The complete resolver cable between the servo amplifier series JetMove 2xx and
the Jetter motor series JL, JK and JH can be obtained from Jetter AG. It can be
ordered by supplying the following cable assy number:
Cable assy # 23
7
Resolver / HIPERFACE
For the servo amplifier series JetMove 2xx
9
8 1
12 10 2
6 11 3
5 4
Jetter AG