Logic Circuit Leds, Switches; Leds - Jetter JM-206-230 User Manual

JetMove 206B-230
Note!
12.3

12.3.1 LEDs

The as-is state of the LED can be scanned in register 10182.
.
Jetter AG
If the proper cable is not available, the uplink port of a switch/hub can be used.
The pin assignment of an uplink port allows connection of terminals or can be
switched over.
Some devices are provided with an automatic crossover function which ensures
automatic adjustment to the cable and distant station.

Logic Circuit LEDs, Switches

ERR (red)
RUN (green)
Following power-up the red LED (ERR)
and the green LED (RUN) are flashing.
Following power-up the red LED (ERR)
flashes three times, then both LEDs
(red = ERR, green = RUN) are flashing.
The red LED (ERR) and the green LED
(RUN) are flashing alternately with
intermittent breaks during runtime.
Logic LEDs
Flashes shortly at initializing.
It remains lit in case of an initialization
error at the Ethernet interface.
Flashes regularly at correct functioning
of the Ethernet interface.
LED Error Messages
The selector is in LOAD position.
The boot loader is running.
The OS of the Ethernet interface is
neither checked nor launched.
The selector is in RUN or STOP
position.
The boot loader is running.
There is no valid operating system of
the Ethernet interface available.
Fatal operating system error of the
Ethernet interface.
12 Ethernet Interface (Option)
89