Camera Ccu Scene; Camera Led - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

camera ccu scene

Stores the current CCU scene or recalls the specified ccu scene.
Synopsis camera ccu scene {recall {factory <1 - 6> | custom <1 - 3>} | store custom <1 - 3>}
Options recall factory <1 - 6>
recall custom <1 - 3>
store custom <1 - 3>
>camera ccu scene recall factory 2
Examples
OK
>
Sets the camera to use factory CCU scene 2.
>camera ccu scene store custom 1
OK
>
Saves the current CCU scene as custom CCU scene 1.

camera led

Set or change the behavior of the status light.
Synopsis camera led { get | off | on }
get
Options
off
on
>camera led off
Examples
OK
>
Disables the status light. When the LED is off, you cannot tell by looking at the
camera whether it is sending video.
>camera led get
led:
OK
>
Returns the current state of the status light.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
on
44
Recalls the camera to the specified scene
(factory 1 - 6 or custom 1 - 3) .
Saves the current scene as the specified
custom scene.
Returns the status light's current state (on or
off).
Disables the status light.
Enables the status light.