Camera Ccu Set - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

camera ccu set

Sets the specified CCU (lighting) information.
Synopsis camera ccu set <param> <value>
Options auto_white_balance {on | off} Sets the current state of the auto white
red_gain <0 - 255>
blue_gain <0 - 255>
backlight_compensation {on
| off}
iris <0 - 21>
auto_iris {on | off}
gain <1 - 12>
detail <0 - 15>
chroma <0 - 14>
gamma <-64 - 64>
wide_dynamic_range {on | off} Sets Wide Dynamic Range mode on or off.
>camera ccu set auto_iris off
Examples
OK
>
Turns off auto-iris mode, returning the camera to manual iris control.
>camera ccu set red_gain 10
OK
>
Sets the red gain value to 10.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
43
balance setting (on or off). Auto white balance
overrides red gain and blue gain manual
settings.
Sets the red gain value as an integer (0 to
255). Can only be used when auto white
balance is off.
Sets the blue gain value as an integer (0 to
255). Can only be used when auto white
balance is off.
Sets the current state of the backlight
compensation setting (on or off). Can only be
used when wide dynamic range mode is off.
Sets the iris value as an integer (0 to 21). Can
only be used when auto-iris is off.
Sets the auto-iris state (on or off). Auto-iris
disables manual iris and gain when it is on.
Sets gain value as an integer (1 to 12). Can
only be used when auto-iris is off.
Sets the detail value as an integer (0 to 15).
Sets the chroma value as an integer (0 to 14).
Sets the gamma value as an integer (-64 to
64)
Can only be used when backlight
compensation is off.