Camera Home; Camera Pan - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

camera home

Moves the camera to its home position.
Synopsis camera home
>camera home
Example
OK
>

camera pan

Moves the camera horizontally.
Synopsis camera pan { left [<speed>] | right [<speed>] | stop | get | set }
Options left
right
speed <1 – 24>
stop
set <position>
get
Examples >camera pan left
OK
>
Pans the camera left at the default speed.
>camera pan stop
OK
>
Stops the camera's horizontal motion.
>camera pan set -15 22
OK
>
Pans the camera to 15° left of its centerline using a speed of 22.
Moves the camera left.
Moves the camera right.
Optional: Specifies the pan speed as an integer
(1 to 24). Default speed is 12.
Stops the camera's horizontal movement.
Sets the camera's absolute pan position in
degrees, as a floating point value. Range is
approximately -155.00 (left) and 155.00 (right).
Individual cameras may have an additional
degree or two of travel before they reach their
physical limits.
If the value is out of range, the camera returns
an error message and no motion occurs. The
speed parameter may be used with the camera
pan set command.
The camera pan set command blocks
execution of subsequent commands until the
camera reaches the specified position.
Returns the camera's absolute pan position in
degrees, as a floating point value.
49