Unpacking The Camera - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Unpacking the Camera

Note
This camera is shipped with a tile brace for use in suspended acoustic tile ceilings. Safety wires for
suspending and leveling the tile brace are not included, but are strongly recommended. (we recommend the
Speed Connect Hardware Kit from Chief, part number CMSHDW)
Make sure you receive all the items you expected.
RoboFLIP 30 HDBT with OneLINK HDMI
999-99800-100 (North America), 999-99800-101
(Europe/UK), 999-99800-109 (Australia/New Zealand)
RoboFLIP 30 HDBT camera
n
Trim ring with mounting screws (shown mounted to
n
the camera)
Tile support brace
n
Cutting template
n
IR remote
n
OneLINK HDMI Receiver kit – includes:
n
OneLINK HDMI receiver
o
48 VDC power supply and AC cord set(s)
o
EZCamera RS-232 Control Adapter
o
Installation Guide
n
RoboFLIP 30 HDBT with OneLINK Bridge
999-99800-200 (North America), 999-99800-201
(Europe/UK), 999-99800-209 (Australia/New Zealand)
RoboFLIP 30 HDBT camera
n
Trim ring with mounting screws (shown mounted to
n
the camera)
Tile support brace
n
Cutting template
n
IR remote
n
OneLINK Bridge AV Interface kit – includes:
n
OneLINK Bridge AV interface
o
48 VDC power supply and AC cord set(s)
o
3-position Phoenix-type connectors (qty. 4)
o
USB 3.0 cable, type A to type B, 6 ft (1.8 m)
o
EZCamera RS-232 Control Adapter
o
Installation Guide
n
2