Telescope Communications Mounting Plate - Knoll Antenna Telescope Installation Instructions And Parts Manual

Telescope Communications Mounting Plate

Pattern Numbers Represented:
Telescope Communications
YR1TCMP
Mounting Plate,
Parts List:
Mounting Plate (A)
Clamping Bracket (B)
B-32 x .625 Flat Head Machine Screw (C)
Pre-assembled Telescope Table with Dual Utility Tray
Tools Needed:
Manual Ratcheting Phillips Head Screwdriver
STEPS
Build the communications mounting plate
1.
assembly by loosely attaching (2) clamping
brackets (B) to the back of the mounting
plate (A) with (2) B-32 x .625 flat head
machine screws (C). Do not tighten screws.
Keep the clamping brackets (B) oriented
in parallel with the mounting plate.
Antenna Telescope Installation Instructions
® ™
October 2018
(A) 3AF5034*
2. Insert the mounting plate assembly into the data
tray. Rotate the clamping brackets so they are
vertical and fit behind the lip of the data tray.
Antenna
(B) 3AF5009* (C) 4A22237
3. Tighten the B-32 x .625 flat head machine
screws (C) until the communications
mounting plate is secure in the data tray.
Telescope
®
™
109