Telescope Y-Base Adjustable Height Tables - Knoll Antenna Telescope Installation Instructions And Parts Manual

Telescope Y-Base Adjustable Height Tables

Pattern Numbers Represented:
Telescope Y-Base Table, Rectangular,
Height-Adjustable Standard Electric,
Telescope Y-Base Table, Track,
Height-Adjustable Standard Electric,
Telescope Y-Base Table, Bullet,
Height-Adjustable Standard Electric,
Parts List:
Glide Assembly (A)
Square Tube End Cap (B)
Housing Cover (C)
Transformer Shelf (D)
Top Support Bracket, Left Hand (E)
Top Support Bracket, Right Hand (F)
Cable Clip (G)
/ -18 x 1.5" Hex Socket Cap Screw (H)
5
16
¼-20 x ¾" Flat Head Machine Screw (I)
¼-20 x / " Flat Head Machine Screw (J)
5
8
5 / – 18 x 2.25" Flat Head Machine Screw (K)
16
10-24 x ¾" Flat Head Machine Screw (L)
#14 x 1" Flat Head Wood Screw (M)
#6 x / " Wood Screw (N)
5
8
Column Leg Assembly
Hub Weldment
Spoke
Dual Base Stretcher
Handset Control
iDrive Cable Kit
Power Supply
Power Cord
Table Top, Veneer or Laminate
P Clamp Kit
Tools Needed:
Power Driver
Phillips #2, #3 and #4 Bits
¼" Allen Wrench / Hex Bit and Ratchet
Rubber Mallet
STEPS
PREPARE LEGS
1. Attach a Hub Weldment to the bottom of
each Column Leg Assembly with (3)
1.5" Hex Socket Machine Screw (H) each.
2. Affix (2) Spokes to the two outboard arms of
each Hub Weldment, and position (1) Dual Base
Stretcher on the remaining arms, connecting
the column leg assemblies. Attach the spokes
and stretcher using (2) ¼-20 x ¾" flat head
machine screws (I) at each connection point.
Antenna Telescope Installation Instructions
® ™
October 2018
(A) 3AB4242
YKTS_ _YES_ _
YKTT_ _ YES_ _
YKTB_ _ YES_ _
(D) 3AF4002
(G) 3AF4070
(J) 7189140
(M) 7491140
3. Install a Glide Assembly (A) into
the bottom of each spoke.
/ -18 x
5
4. Insert an end cap (B) into the end of
16
each spoke, using a rubber mallet to
ensure the cap is inserted fully.
5. Attach a Top Support Bracket, Left
Hand (E), and a Top Support Bracket,
Right Hand (F) to the long sides of each
housing, using (2)
head machine screws (K) per bracket.
(B) 3AB9008
(E) 3AF4100L
(H) 4A22202
(K) 3AF4089
(N) 7528496
/ – 18 x 2.25" Phillips
5
16
Antenna Telescope
®
(C) 3AF4003
(F) 3AF4100R
(I) 7418440
(L) 4A21722
6. Attach a Housing Cover (C) to the outboard
end of each housing, using (2) ¼-20 x
flat head machine screws (J) per cover.
7. Attach a Transformer Shelf (D) to the inboard
side of each housing, using (2) ¼-20 x
flat head machine screws (J) per shelf.
8. Attach a Cable Clip (G) beneath each Top
Support Bracket (E/F) using (1) 10-24 x ¾"
Flat Head Machine Screw (L) per clip.
™
/ "
5
8
/ "
5
8
71