Knoll Antenna Telescope Installation Instructions And Parts Manual page 68

Telescope Return Bases
Step 1
/
5 -18 x 1 1/4" Button
16
Head Hex Machine
Screws (O)
Horizontal Rail Cradle (B)
Return Column
Assembly (A)
Step 2
Housing Cover (D)
/
¼-20 x 5 " Flat Head
8
Phillips Machine Screws (N)
STEPS
Note
: Follow installation steps 1 through
27 for Telescope Dual Table Bases before
proceeding with the assembly of the return.
PREPARE RETURN COLUMN
1. Attach (2) Horizontal Rail Cradles (B) to the
upper housing box on the Return Column
Assembly (A), with (2) / -18 x 1 1/4" button
5
16
head hex machine screws (O) per cradle.
Antenna Telescope Installation Instructions
® ™
October 2018
2. Attach a Housing Cover (D) to the short
end of the housing, using (2) ¼-20 x
flat head Phillips machine screws (N).
3. Attach a Transformer Shelf (E) to the opposite
side of the housing, using (2) ¼-20 x
flat head Phillips machine screws (N).
Antenna
Step 4
/
¼-20 x 5 " Flat Head
8
Phillips Machine Screws (N)
Cradle Clamp Bracket (C)
Transformer Shelf (E)
¼-20 x
Phillips Machine Screws (N)
4. Fasten (2) Cradle Clamp Brackets (C) loosely
/ " to each cradle (B) using (4) ¼-20 x
5
8
head Phillips machine screws (N) per cradle.
Note
: The cradle clamp brackets (C) are
/ " always to be placed in the outer position
5
8
in the cradle (B), and the end is to be flush
with the face of the housing cover (D).
Telescope
®
™
Step 3
/
5 " Flat Head
8
/ " flat
5
8
68