Knoll Antenna Telescope Installation Instructions And Parts Manual page 52

Telescope Single Sided Table Bases with Beam
(with or without Utility Tray), Side by Side Application
Crossbar drilled inside only,
for leg, beam & tray
Exploded Single Sided Table Base Assembly, Side
by Side Application, Connection Overview
ATTACHED CONNECTOR LINKS/
CONNECT TABLES:
1. Attach (2) Dovetail Linking Brackets (C) to
the outside of the crossbars at "connected"
locations using (2) ¼ -20 x .75" flat head
machine screws (B) for each bracket. The
base of the "L" should be oriented downward.
2. Prepare the Connector Links (E) for the Wire
Hangers (D) by loosely screwing (2) ¼-20 x
.75" button head machine screws (A) into the
underside of each connector link. Leave a gap
of about 3/ " beneath the head of the screws.
16
Place the wire hanger over the heads of the
screws and slide to engage the keyhole slots.
Antenna Telescope Installation Instructions
® ™
October 2018
Exploded Single Sided Table Base, Connection Detail, Attachment Steps 1-3
3. To connect tables, position both table
assemblies side by side so the prepared
connector links (E) can be slid down onto the
linking brackets (C) previously attached to
the crossbars. Fasten the connector links to
the linking brackets with one ¼ -20 x .75" flat
head machine screw (B) per linking bracket.
Continue referring to the instructions
for Telescope Single Sided Table Bases
with Beam (with or without Utility Tray),
Stand-Alone Application as follows:
Antenna Telescope
®
Step 1
¼-20 x ¾" Flat Head Phillips
Machine Screw (B)
Dovetail Linking Brackets (C)
Step 2
Connector Link (E)
Wire Hanger (D)
¼-20 x .75" Button
Head Machine
Screw (A)
Follow steps 29-30
to install tops.
Follow step 31 to affix handset.
ATTACH RETURNS (WHERE APPLICABLE):
See Telescope Return Base Installation Instructions.
INSTALL POWER STRIP ACCESSORY
(WHERE APPLICABLE):
See Power Strip Installation Instructions.
INSTALL CLEAT PLATE & CLEAT PLATE COVER
ACCESSORIES (WHERE APPLICABLE):
See Cleat Plate and Cleat Plate
Cover Installation Instructions.
™
Step 3
¼-20 x ¾" Flat
Head Phillips
Machine
Screw (B)
52