Knoll Antenna Telescope Installation Instructions And Parts Manual page 100

Telescope Z-Managers
11. Similarly, insert the Lower Corrugated Strap (H)
into the lower extrusion of the subassembly (F).
12. Snap the upper portion of the now lengthened
strap assembly into the Upper Mount
Management Bracket (B), previously mounted
to the underside of the top. Be sure the
desired orientation is maintained and that
the cord channel of the strap assembly is in
line with the cord channel of the mount.
Antenna Telescope Installation Instructions
® ™
October 2018
13. Similarly, insert the lower portion of the
strap assembly into the beam mounted
Lower Mount Bracket (C). Be sure that the
cord channel of the strap assembly is in
line with the cord channel of the mount.
14. Lower the table to the desired end-user height.
Z-Managers, Plan View, Back
to Back Configuration.
Antenna Telescope
®
TROUBLESHOOTING THE CORD CHANNEL:
15. If you find that the cord channel is
difficult to open, a flat-blade screwdriver
may be used to pry apart the snapped
connection at one end, then "unzip" the
seam all the way to the other end.
Z-Managers
Beam
™
100