Knoll Antenna Telescope Installation Instructions And Parts Manual page 23

Telescope Dual Table Bases without Beam
and Dual Utility Trays - Extended Electric
5/16-18 x 1 1/4"
Button Head Hex
Machine Screw (L)
Step 1
Right Hand Column
Leg Assembly (A)
Exploded Table Base Without
Beam Assembly, Steps 1-3
STEPS
PREPARE LEGS & CROSSBARS:
1. Attach (2) Horizontal Rail Cradles (C) to the
upper housing boxes on the Right Hand
and Left Hand Column Leg Assemblies
(A/B), with (2) 5/16-18 x 1 1/4" button head
hex machine screws (L) per cradle.
Antenna Telescope Installation Instructions
® ™
October 2018
Horizontal Rail
Cradle (C)
Step 2
Housing
Cover (E)
1/4-20 x 5/8" Flat
Head Phillips
Machine Screw (M)
2. Attach a Housing Cover (E) to the short end
of each housing, using (2) 1/4-20 x 5/8" flat
head Phillips machine screws (M) per cover.
3. Attach a Transformer Shelf (F) to the opposite
side of each housing, using (2) 1/4-20 x 5/8" flat
head Phillips machine screws (M) per shelf.
Antenna Telescope
®
Step 3
Transformer Shelf (F)
1/4-20 x 5/8" Flat
Head Phillips
Machine Screw (M)
Left Hand Column
Leg Assembly (B)
™
23