Introduction - Knoll Antenna Telescope Installation Instructions And Parts Manual

Introduction

Using the Antenna
®
Installation Instructions and Parts Manual
An Overview
Each section of the Installation Instructions
and Parts Manual contains information
to guide you through Antenna Telescope
®
installations and to help you determine which
parts you may need to order as replacements
or to supplement reconfigurations.
Each page contains the following sections:
The Parts List section contains a lettered list
of the essential component parts required for
the application's installation. Items required that
may vary in size, (i.e. worksurfaces or rails), have
not been lettered, and replacements should
be ordered directly from the Price List or by
contacting Field Services for the correct part.
The Tools Needed section contains
a list of the installation tools that will be
required on site for the proper installation
of the application or configuration.
A Graphic Section has been included, to
the right of the Parts List, depicting images of
the component parts with lettered codes that
correspond to those in the Parts List. Each part
is shown with its associated part number above.
NOTE
: Part numbers with an asterisk, i.e. *,
after the number require a paint finish code
to be added to the end of the pattern number
to be orderable as a replacement part.
Please refer to the Finish Code listing at the
end of this page for the available codes.
NOTE
: Part numbers with empty brackets, i.e. (_),
after the pattern number indicate that a laminate
or veneer finish code must be added to the
end of the pattern number to be orderable as a
replacement part. Please refer to the Finish Code
listing in the Antenna™ Workspaces Price List for
the available finish codes for those products.
Antenna Telescope Installation Instructions
® ™
October 2018
Telescope
™
Please note that not all parts are available
in all finishes. Finish options available for
component parts match those available when
ordered with the complete items' pattern number
™
per the Antenna™ Workspaces Price List.
The Steps section details step-by-step
instructions for the installation of the application
selected. Each step includes references to the
lettered items noted in the Parts List at the
top of the page and in the graphic section.
A Drawings section follows the steps section
providing detailed assembled and exploded
drawings to further assist in installation and
in determining replacement parts required.
How to Order Parts
1. Look in this document's bookmarks to locate
the configuration which best fits the application.
2. Go to the page where that application
is described and thoroughly review all
installation instructions to determine
the part number(s) needed.
3. Unless otherwise noted, the standard package
quantity is one (1). When ordering products
where the quantity per package is listed,
please indicate the number of packages
required in the quantity column of your order.
4. Be sure to add "KR" to the beginning
of each part number.
5. Be sure to include any finish codes required
to complete the pattern number(s).
6. Complete a Knoll Service order,
which can be sent to your Knoll
Customer Service Representative.
Antenna Telescope
®
If you have any questions about the
contents of this manual, please call
your Customer Service Representative
or Field Service at 800-343-5665.
Paint Finish Codes:
111T - Jet Black
112T - Brown
113T - Dark Grey
114T - Folkstone Grey
115T - Medium Grey
116T - Sandstone
117T - Soft Grey
118T - Bright White
611T - Beige Metallic Mist
612T - Medium Metallic Grey
613T - Silver
130T - Dark Red
131T - Slate Blue
™
3