Knoll Antenna Telescope Installation Instructions And Parts Manual page 60

Telescope 120˚ Triad with Beam
(with or without Dual Utility Trays)
14. Attach a Center Beam Mounting Plate (U) to
all three tri crossbars, using (4) ¼-20 x ¾"
button head machine screws (V) per plate.
Insert M8-1.25 x 8mm hex set screws (W)
into both tabs on the sides of all three plates
(U), such that the hex recesses are outward.
Antenna Telescope Installation Instructions
® ™
October 2018
Step 14 & 15
Center Beam
Mounting Plate (U)
Mid Position Assembly Connection to Outer Position
Assembly, Partially Exploded Detail, Steps 14 & 15
15. Connect a T-shaped outer column leg sub-
assembly to the central standing triangular
structure by attaching the beam end to a
crossbar mounted beam mounting plate (U),
and secure by tightening the set screws (W)
with a 4mm hex driver.
¼-20 x ¾" Button Head
Machine Screw (V)
M8-1.25 x 8mm Hex
Set Screw (W)
Repeat for the two remaining beam/
column leg sub-assemblies.
Antenna Telescope
®
™
60