Optional Mounting Guidelines; System Configuration (Example) - Knoll k.stand User Manual

2.3 Optional mounting guidelines

NOTICE
When disconnecting components such as power supply,
control unit / ECS+ or motor cables, the strain relieve
hook must be pressed before removing the connector.
When inserting the connector, an audible "click" indicates
that the strain relieve hook has correctly re-engaged.
DANGER—Grounding
Instruction
This product does NOT require grounding to
earth. This product is double insulated and equipped
with a non-polarized 120V plug and 2-conductor cord.
The plug must be plugged into an appropriate building
outlet that is properly installed in accordance with all
local codes and ordinances.
DANGER—Risk of
electrical shock
Improper connection of the equipment can result in a
risk of electric shock. Check with a qualified electrician
for any concerns. Do not modify the plug provided
with the product—if it will not fit the outlet have a
proper outlet installed by a qualified electrician.
This product is designed for the voltage indicated on
the power supply label. No adapters should be used
with this product.
©Knoll, Inc.
CAUTION—Risk of
electrical shock
Before you plug in the power cord, check the following
again:
• The voltage must be as specified on the power
supply label.
• When the power cord is plugged in, the electrical
control devices are operational.
NOTICE
In case of a main power breakdown, or if the power
cord is unplugged during the movement of the drives,
a manual reset may be necessary! Please see section
3.2 manual reset.
2.4 System configuration
(example)
The figure below shows the motor driving assignment for
a configuration example. This configuration consists of:
1 Power Supply
2 Motor cables
3 Handset
4 Control unit
k.stand Height-Adjustable Table Standard Electric and Extended Electric—Stroke 650/470 User Manual 8